router rip
router rip
To configure the Routing Information Protocol (RIP) routing process, use the router rip command. To
turn off the RIP routing process, use the no form of this command.
Syntax Description
instance-tag
Command Default
No RIP routing process is defined.
Command Modes
Global configuration mode
Command History
Release
5.0(3)A1(1)
Examples
This example shows how to begin the RIP routing process:
switch# configure terminal
switch(config)# router rip Enterprise
switch(config-router)#
Related Commands
Command
ip router rip
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
320
router rip instance-tag
no router rip
Name for this RIP instance.
Modification
This command was introduced.
Description
Specifies a RIP instance for an interface.
Chapter
Unicast Routing Commands
OL-27852-01