Show Ip Bgp Extcommunity - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Show Commands

show ip bgp extcommunity

To display Border Gateway Protocol (BGP) routes that match an extended community, use the show ip
bgp extcommunity command.
Syntax Description generic
non-transitive
transitive
as4-number
exact-match
vrf vrf-name
Command Default None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display routes that match an extended community:
switch(config)# show ip bgp extcommunity generic transitive 1.3:30
Related Commands Command
ip extcommunity-list
OL-27852-01
show ip bgp extcommunity generic {non-transitive | transitive} [as4-number] [exact-match]
[vrf vrf-name]
Displays the routes that match the generic specifice extended communities.
Displays the routes that match the non-transitive extended communities.
Displays the routes that match the transitive extended communities.
(Optional) AS number. The as4-number is a 32-bit integer in the form of a
plaintext integer or <higher 16-bit decimal number>.<lower 16-bit decimal
number> .
(Optional) Displays an exact match of the extended community.
(Optional) Specifies the virtual router context (VRF) name. The name can be
any case-sensitive, alphanumeric string up to 32 characters.
Modification
This command was introduced.
Description
Creates an extended community list.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
show ip bgp extcommunity
441