Show Ip Bgp Prefix-List - Cisco Nexus 3548 Command Reference Manual

show ip bgp prefix-list

show ip bgp prefix-list
To display Border Gateway Protocol (BGP) routes that match a prefix list, use the show ip bgp
prefix-list command.
Syntax Description list-name
exact-match
vrf vrf-name
Command Default
None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines
This command requires the LAN Enterprise Services license.
Examples This example shows how to display routes that match a prefix list:
switch(config)# show ip bgp prefix-list test1
Related Commands Command
maximum-prefix
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
452
show ip bgp prefix-list list-name [exact-match] [vrf vrf-name]
Name of a prefix list. The commlist-name can be any case-sensitive, alphanumeric
string up to 63 characters.
(Optional) Displays an exact match of the filter.
(Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
Modification
This command was introduced.
Description
Controls the number of prefixes that can be received from a BGP neighbor.
Chapter Unicast Routing Show Commands
OL-27852-01