Cisco Nexus 3548 Command Reference Manual page 260

match ip route-source prefix-list
Examples This example shows how to distribute routes that have been advertised by routers and access servers at
the addresses specified by access lists 5 and 80:
switch# configure terminal
switch(config)# route-map blue
switch(config-route-map)#
switch(config-route-map)#
Related Commands Command
match as-path
match community
match ip address
match ip next-hop
match route-type
route-map
set as-path
set automatic-tag
set community
set level
set local-preference
set metric (BGP, OSPF, RIP) Sets the metric value for a routing protocol.
set metric-type
set next-hop
set tag
set weight
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
240
match ip route-source prefix-list 5 80
Description
Matches a BGP autonomous system path access list.
Matches a BGP community.
Distributes any routes that have a destination network number address
that is permitted by a standard or expanded access list.
Redistributes any routes that have a next-hop router address passed by
one of the access lists specified.
Redistributes routes of the specified type.
Defines the conditions for redistributing routes from one routing
protocol into another.
Modifies an autonomous system path for BGP routes.
Automatically computes the tag value.
Sets the BGP communities attribute.
Indicates where to import routes.
Specifies a preference value for the autonomous system path.
Sets the metric type for the destination routing protocol.
Specifies the address of the next hop.
Sets a tag value of the destination routing protocol.
Specifies the BGP weight for the routing table.
Chapter Unicast Routing Commands
OL-27852-01