Show Ip Client - Cisco Nexus 3548 Command Reference Manual

show ip client

show ip client
To display information about the internal IP clients, use the show ip client command.
Syntax Description
name
Command Default None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Examples This example shows how to display the IP client information for the Address Resolution Protocol (ARP):
switch(config)# show ip client arp
Related Commands Command
show ip process
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
456
show ip client [name]
(Optional) Name of the client.
Modification
This command was introduced.
Description
Displays information about the IP process.
Chapter Unicast Routing Show Commands
OL-27852-01