Cisco Nexus 3548 Command Reference Manual page 316

redistribute (EIGRP)
You must configure a default metric to redistribute routes from another protocol into EIGRP. You can
configure the default metric with the default-metric command or with the route map configured with
the redistribute command.
This command requires the LAN Enterprise Services license.
Examples
This example shows how to redistribute cause BGP routes into an EIGRP autonomous system:
switch# configure terminal
switch(config)# router eigrp 209
switch(config-router) address-family ipv4 unicast
switch(config-router-af)# redistribute bgp 64496
switch(config-router-af)
Related Commands Command
default-metric
(EIGRP)
show ip eigrp
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
296
Description
Sets the default metrics for routes redistributed into EIGRP.
Displays EIGRP information.
Chapter Unicast Routing Commands
OL-27852-01