Show Ip Rip Statistics - Cisco Nexus 3548 Command Reference Manual

show ip rip statistics

show ip rip statistics
To display statistical entry information from the Routing Information Protocol (RIP) topology table, use
the show ip rip statistics command in any mode.
Syntax Description interface-type
instance
vrf vrf-name
Command Default No default behavior or values.
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Examples This example shows how to display the RIP statistics:
switch# show ip rip statistics
Related Commands Command
show ip rip
show ip rip interface
show ip rip neighbor
show ip rip policy statistics
show ip rip route
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
504
show ip rip statistics [interface-type instance] [vrf vrf-name]
(Optional) Interface type. For more information, use the question mark (?)
online help function.
(Optional) Either a physical interface instance or a virtual interface
instance.
(Optional) Specifies the name of the virtual routing and forwarding (VRF)
instance. The vrf-name argument can be specified as any case-sensitive,
alphanumeric string up to 32 characters. The strings "default" and "all" are
reserved VRF names.
Modification
This command was introduced.
Description
Displays RIP information.
Displays RIP information for an interface.
Displays RIP information for a neighbor.
Displays policy statistics for RIP.
Displays RIP route information.
Chapter Unicast Routing Show Commands
OL-27852-01