Show Ip Ospf Retransmission-List - Cisco Nexus 3548 Command Reference Manual

show ip ospf retransmission-list

show ip ospf retransmission-list
To display a list of all link-state advertisements (LSAs) waiting to be resent to neighbors, use the show
ip ospf retransmission-list command.
Syntax Description neighbor-id
ethernet slot/port
loopback if_number
port-channel number (Optional) Specifies the EtherChannel interface and EtherChannel number.
Command Default None
Command Modes
Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines Use the show ip ospf retransmission-list command to troubleshoot Open Shortest Path First (OSPF)
routing operations.
This command requires the LAN Enterprise Services license.
Examples
This example shows how to display all LSAs waiting to be resent to neighbors:
switch# show ip ospf retransmission-list 192.0.2.11 ethernet 2/1
Related Commands Command
show running-config
ospf
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
490
show ip ospf retransmission-list neighbor-id {ethernet slot/port | loopback if_number |
port-channel number}
Router ID of the neighbor. Specify as an IP address.
(Optional) Specifies the Ethernet interface and the slot number and port
number. The slot number is from 1 to 255, and the port number is from 1 to
128.
(Optional) Specifies the loopback interface. The loopback interface number is
from 0 to 1023.
The range is from 1 to 4096.
Modification
This command was introduced.
Description
Displays the OSPF running configuration.
Chapter Unicast Routing Show Commands
OL-27852-01