Confederation - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Commands

confederation

To configure the confederation parameters for the Border Gateway Protocol (BGP), use the
confederation command.
Syntax Description identifier
peers
as-number
Command Default
None
Command Modes Router configuration mode
Router VRF mode
Command History Release
5.0(3)A1(1)
Usage Guidelines
This command requires the LAN Enterprise Services license.
Examples This example shows how to configure the confederation identifier:
switch# configure terminal
switch(config)# router bgp 65536.33
switch(config-router)# confederation identifier 65536.33
switch(config-router)#
Related Commands Command
show bgp
OL-27852-01
confederation {identifier | peers} as-number
Sets the routing domain confederation autonomous system (AS) number.
Sets the peer AS numbers for a BGP confederation.
Autonomous system number. The AS number can be a 16-bit integer or a 32-bit
integer in the form of <higher 16-bit decimal number>.<lower 16-bit decimal
number>.
Modification
This command was introduced.
Description
Displays information about BGP.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
confederation
97