Wash Down Stainless Cleaning - ABB IRB 360-1/800 Product Manual

3 Maintenance

3.6.4 Wash down stainless cleaning

3.6.4 Wash down stainless cleaning
Required equipment
Equipment
High pressure washer
Usable detergents
The stainless version is verified against the following detergents.
Detergent
Detergent
Detergent
Detergent
Disinfectant
Cleaning instructions
1
2
3
4
5
6
Continues on next page
150
DANGER
turn off all electrical power, hydraulic and pneumatic pressure supplies before
entering the workspace of the manipulator.
Also read the safety sections:
• Safety risks related to pneumatic/hydraulic systems on page 33
• Risks associated with live electric parts on page 29
• Safety risks during installation and service work on robots on page 23
Action
Pre-rinse with water for removal
of rough soil with low pressure.
See figure for Sensitive spots
on page 144.
Foam the whole external surface
with detergent.
Let the detergent work for ap-
prox 20 minutes to retain effect-
ive cleaning properties.
Ensure that the solvent does not
dry on the surface.
Rinse thoroughly with water.
Apply the disinfectant. Time,
concentration, and water temper-
ature are chosen to reach the
desired effect.
Rinse thoroughly with water.
© Copyright 2008-2018 ABB. All rights reserved.
Note
Type Old designation
Topaz MD4 Topmaxx 421
Topaz CL2 P3-topax M 55
Topaz AC3 P3-topax 56
P3-topactive DES
Note
• Water temperature: max. 80°C
• Detergent: TOPAZ MD4
• Concentration: 3 %
• Water temperature: 40 - 60°C
• Detergent: P3-topactive DES
• Concentration: 1 - 2%.
• Water temperature: 10 - 40°C
• Time approx. 20 min.
Product manual - IRB 360
3HAC030005-001 Revision: U