Transport - ABB IRB 360-1/800 Product Manual

2.3.2 Transport

General
This section describes how to transport the manipulator.
Transport position
Whenever the manipulator is transported, it must be in mounting position. It is not
allowed to turn the manipulator up side down.
When air transport is used, the robot must be located in a pressure-equalized area.
Product manual - IRB 360
3HAC030005-001 Revision: U
Note
The transport shall be made by qualified personnel and should conform to all
national and local codes.
WARNING
The center of gravity for IRB 360 during transport is very high, 804-810 mm from
the bottom. It might tilt and fall when carried on a forklift.
© Copyright 2008-2018 ABB. All rights reserved.
2 Installation and commissioning
Continues on next page
2.3.2 Transport
53