Telescopic Shaft, Wash Down, Axis - ABB IRB 360-1/800 Product Manual

3 Maintenance

3.3.2 Telescopic shaft, wash down, axis 4

3.3.2 Telescopic shaft, wash down, axis 4
General
This section describes maintenance on the telescopic shaft (wash down), axis 4
interval 500 and 4000 h
Telescopic shaft
xx0700000717
Required equipment and references
References
Replacement of telescopic shaft on page 190
Spare parts, telescopic shaft.
Continues on next page
104
DANGER
Turn off all electrical power, hydraulic and pneumatic pressure supplies before
entering the workspace of the manipulator.
Also read the safety sections:
• Safety risks related to pneumatic/hydraulic systems on page 33
• Risks associated with live electric parts on page 29
• Safety risks during installation and service work on robots on page 23
Note
The wear on the bearings depends on the payload, cycle, environment, and
lubrication.
© Copyright 2008-2018 ABB. All rights reserved.
Product manual - IRB 360
3HAC030005-001 Revision: U