4.4.2 Draining of water separation filter
General
This section describes:
Location
xx0700000544
A
B
C
Product manual - IRB 360
3HAC030005-001 Revision: U
•
Air filter change in the vacuum system
•
Emptying water separation filter
DANGER
Turn off all electrical power, hydraulic and pneumatic pressure supplies before
entering the workspace of the manipulator.
Also read the safety sections:
•
Safety risks related to pneumatic/hydraulic systems on page 33
•
Risks associated with live electric parts on page 29
•
Safety risks during installation and service work on robots on page 23
CAUTION
Always read the specific instructions for Clean Room robots before doing any
repair work, see
Cut the paint or surface on the robot before replacing parts on
page
165.
Air filter (comp)
Air filter (Vac)
Water separation bottom nipple
© Copyright 2008-2018 ABB. All rights reserved.
4.4.2 Draining of water separation filter
Continues on next page
4 Repair
223