Changing Tail Lights (On The Rear Lid) - Seat Toledo 2019 Owner's Manual

Position of the bulbs
›››
Fig. 101 Bulb function
Turn signals: PY21W NA LL
A
Side lights-brake lights: P21/5W
B
Position: P21/5W
C
Note
Check the condition of the seal. If dam-
aged, a replacement can be acquired from
an Official Service.
Fitting the rear light
Fit the tail light unit.
Fig. 102
1)
For rear-lid LED rear lights, only the reverse and
retro fog bulb can be replaced. The illustrations in
the manual correspond to the bulb version and
do not correspond exactly to the LED version.
92
Emergencies
Fit the tail light unit.
Fig. 103
Make sure the connector is correctly in
–
place.
Press the rear light unit backwards (driving
–
direction) by fitting the fastenings into the
›››
rubber mountings Fig. 102
Take the screwdriver or a Torx 20 key (T20)
–
from the vehicle tool kit and tighten (turning
›››
clockwise Fig. 103) the two retaining
screws that secure the front of the light.
Changing tail lights (on the
rear lid)
Removing the bulb holder
.
Remove the cover from the rear lid.
A Fig. 104
1)