Bonnet
Unlocking the bonnet.
Fig. 9
The essentials
Locking the bonnet.
Fig. 10
Opening the bonnet
The bonnet is released from inside the vehi-
cle.
Before opening the bonnet, make sure that
the windscreen wiper arms are in place
against the windscreen.
Open the door and pull the lever under the
●
›››
dashboard
Fig. 9
.
1
To lift the bonnet: press the release catch
●
under the bonnet upwards
. The arrester
2
hook under the bonnet is released.
The bonnet can be opened. Release the
●
bonnet stay in the direction of the arrow
›››
Fig. 10
and secure it in the fixture de-
3
signed for this in the bonnet
.
4
Closing the bonnet
Slightly lift the bonnet.
●
Release the bonnet stay and replace it in its
●
support.
At a height of approximately 30 cm let it fall
●
so it locks.
If the bonnet does not close, do not press
downwards. Open it again and let it fall as
mentioned above.
›››
in Working in the engine com-
partment on page 245
›››
page 244
13