Fuses And Bulbs - Seat Toledo 2019 Owner's Manual

Table of Contents

Advertisement

down on its right-hand side. The cover must
be securely engaged.
Fitting and detaching the towline anchor-
age
Screw in the towline anchorage anti-clock-
wise by hand as far as it will go
.
To tighten the towline anchorage, we recom-
mend using the box spanner, the towing eye
from another vehicle or a similar object that
can be inserted through the anchorage.
Unscrew the towline anchorage by turning
it clockwise.
CAUTION
The towline anchorage must be screwed in
as far as it will go. Otherwise there is a risk
of the screw connection shearing off during
towing or tow-starting!

Fuses and bulbs

Fuses and bulbs
Fuses
Introduction
›››
Fig. 85
Due to the constant updating of vehicles, fuse
assignments based on equipment and the
use of the same fuse for various electrical
components, it is not possible to provide an
up-to-date summary of the fuse positions for
the electrical components at the time this
manual was printed. For detailed information
about the fuse positions, please consult a
technical service.
In general, a fuse can be assigned to various
electrical components. Likewise, an electrical
component can be protected by several
fuses.
Only replace fuses when the cause of the
problem has been solved. If a newly inserted
fuse blows after a short time, you must have
the electrical system checked by a special-
ised workshop as soon as possible.
Additional information and warnings:
Working in the engine compartment
›››
page
244.
WARNING
The high voltages in the electrical system
can give serious electrical shocks, causing
burns and even death!
Never touch the electrical wiring of the
ignition system.
Take care not to cause short circuits in
the electrical system.
WARNING
Using unsuitable fuses, repairing fuses or
bridging a current circuit without fuses can
cause a fire and serious injury.
Never use a fuse with a higher value. Only
replace fuses with a fuse of the same am-
perage (same colour and markings) and
size.
Never repair a fuse.
Never replace a fuse by a metal strip, sta-
ple or similar.
CAUTION
To prevent damage to the vehicle's elec-
tric system, before replacing a fuse always
turn off the ignition, the lights and all elec-
trical elements and remove the key from
the ignition.
If you replace a fuse with higher-rating
fuse, you could cause damage to another
part of the electrical system.
»
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents