Table of Contents
Advertisement
Changing the rear window wiper
blade*
Rear window wiper blade.
Fig. 137
Taking off the wiper blade
Lift the rear window wiper arm away from
–
the glass moving the blade slightly in the
direction of the arm – arrow
Hold the top of the rear window wiper arm
–
with one hand.
Unlock the catch
with the other hand
–
1
and remove the blade in the direction of ar-
row
.
B
Fitting the wiper blade
Slide the blade fully until it clicks into posi-
–
tion.
Check that the wiper is correctly secured.
–
Fold the rear window wiper arm back down
–
onto the glass.
Fuses and bulbs
Fuses
Introduction
Due to the constant updating of vehicles,
fuse assignments based on equipment and
the use of the same fuse for various electrical
components, it is not possible to provide an
up-to-date summary of the fuse positions for
the electrical components at the time this
manual was printed. For detailed information
about the fuse positions, please consult a
technical service.
In general, a fuse can be assigned to various
electrical components. Likewise, an electrical
›››
Fig.
137.
component can be protected by several
A
fuses.
Only replace fuses when the cause of the
problem has been solved. If a newly inserted
fuse blows after a short time, you must have
the electrical system checked by a special-
ised workshop as soon as possible.
Additional information and warnings:
●
Working in the engine compartment
›››
page
132.
Fuses and bulbs
WARNING
The high voltages in the electrical system can
give serious electrical shocks, causing burns
and even death!
●
Never touch the electrical wiring of the igni-
tion system.
Take care not to cause short circuits in the
●
electrical system.
WARNING
Using unsuitable fuses, repairing fuses or
bridging a current circuit without fuses can
cause a fire and serious injury.
●
Never use a fuse with a higher value. Only
replace fuses with a fuse of the same amper-
age (same colour and markings) and size.
●
Never repair a fuse.
●
Never replace a fuse by a metal strip, staple
or similar.
CAUTION
To prevent damage to the vehicle's electric
●
system, before replacing a fuse always turn
off the ignition, the lights and all electrical
elements and remove the key from the igni-
tion.
●
If you replace a fuse with higher-rating
fuse, you could cause damage to another part
of the electrical system.
●
Protect the fuse boxes when open to pre-
vent the entry of dust or humidity as they can
damage the electrical system.
»
163
Advertisement
Table of Contents
