Seat Toledo 2019 Owner's Manual page 238

The manual regulator will remain in this posi-
tion.
›››
Service position Fig. 235
Key is in an open position – the key ar-
● C
row points to the "unlocked" symbol. The key
cannot be removed from the key slot.
The locking balls may be fully inserted
● D
into the body of the ball-headed bar by ap-
plying some pressure.
The red marking on the manual regula-
●
E
tor points towards the white marking on the
ball-headed bar.
Between the manual regulator and the
●
body of the ball-headed bar there is a clearly
visible space of approximately 4 mm
Once the ball-headed bar has been posi-
tioned like this, it will be ready to be placed in
the clamping bush.
WARNING
Do not use the ball-headed bar if it cannot
be correctly placed in the service position.
CAUTION
The key cannot be removed from the man-
ual regulator key slot when it is in the serv-
ice position.
236
Driving
Assembly of the ball-headed bar
.
F
Placing the ball-headed bar/locking
Fig. 236
and removing the key.
Placing the key slot cover.
Fig. 237
Remove the cap from the clamping bush
–
›››
Fig. 233 by pulling downwards.
Place the ball-headed bar in the service
–
›››
position page 235.
Hold the ball-headed bar from underneath
–
›››
Fig. 236 and push it into the clamping
bush as far as possible until you hear it click
›››
into place .
The manual regulator automatically
A
turns in the opposite direction, adjusting to
›››
the ball-headed bar .
Switch off the manual regulator lock with
–
key by turning the key fully to the right in
B
the direction of arrow – the arrow in the
1
key displays the "locked" symbol.
Remove the key in the direction of arrow
–
Place cover over the manual regulator
– C
lock in the direction of arrow
4
.
2
›››
Fig. 237.
3