Visibility - Seat Toledo 2019 Owner's Manual

›››
Press the button Fig. 136 to switch the
lighting on or off.
Interior lights / ambient light*
The lighting of the central console area, the
door handles, the storage pockets in the front
doors and the footwell area will switch on
fully when the doors are opened and will de-
crease in intensity while driving with the dip-
ped beam headlights on.
Depending on the version, a logo is back-lit
on the front passenger's side of the dash
panel. This light comes on when the dipped
beam is activated.
The intensity of the ambient light* can be ad-
justed using the menu Easy Connect >
Lighting settings > Vehicle interior
›››
 page 24.
lighting
Glove box light
The light will come on automatically when
the glove compartment is opened. The light
will go out when the glove compartment is
closed.
Lights and visibility
Luggage compartment light
The light switches on automatically when the
boot is open and switches off automatically
10 minutes after the boot lid has been
opened.

Visibility

Heated rear window
Heated rear window switch.
Fig. 137
Switch the heated rear window on or off by
–
›››
pressing the button Fig.

ing lamp in the button will come on or go off
respectively.
The heated rear window only works when the
engine is running.
After approximately 7 minutes, the heating
device of the rear window switches off auto-
matically.
For the sake of the environment
The heated rear window should be switch-
ed off as soon as the glass is demisted. By
saving electrical power you can also save
›››
fuel page
Note
In the event of a drop in voltage in the on-
board systems, the heated rear window
switches off automatically to ensure
enough power to control the engine
›››
page 255, Automatic disconnection of
electrical equipment.
137, the warn-
211.
127