Changing Rear Lights (In Rear Lid) - Seat Toledo 2014 Owner's Manual

230 Fuses and bulbs

Changing rear lights (in rear lid)

Remove the bulb holder
The rear lid must be open to change the bulbs.
Fig. 169 Remove the bulb holder
You can access the bulb holder for the inner tail lights via the in-
side of the rear lid.
– Check which of the bulbs is defective.
– Open the cover to access the lights, turning it by hand in the di-
rection indicated by the arrows.
– Access the lights by disconnecting the connector
 and unscrewing the bulb holder
to lose the bulb holder retaining screw.
– Change the bulbs ⇒ p age 230.
Changing bulbs
Fig. 168 Remove the All bulbs can be changed easily in the bulb holder.
cover from the rear lid
The bulbs are secured with a bayonet fastener. The table below
gives an overview of the bulbs ⇒ t able on page 231.
⇒ F ig. 169
1
⇒ F ig. 169
. Take care not

Fig. 170 Position of the
bulbs in the bulb holder
