Seat Toledo 2019 Owner's Manual page 123

 It lights up
›››
Main beam on or flasher on page
 It lights up
›››
Bulb failure page 86
For example, the information display indicates:
Check front right dipped headlight!
Several warning and control lamps light up
for a few seconds when the ignition is switch-
ed on, signalling that the function is being
verified. They will switch off after a few sec-
onds.
WARNING
›››
Observe the safety warnings
trol and warning lamps on page
Note
The rear side lights and number plate light
contain several bulbs. The control lamp
lights up only when there is a fault in all the
number plate bulbs or side light bulbs (of a
combined tail light). Therefore it is advisa-
ble to regularly check the bulb operation.
Lights and visibility
Side light and dipped beam head-
light
122.
Instrument panel: light panel.
Fig. 129
Switching the side lights on
Turn the light switch
–
in Con-
.

103.
Switching on dipped beam
Turn the light switch
–
.


Switching off lights (except daytime driv-
ing lights)
Turn the light switch
–
0.
Headlight range control
Fig. 130
Turn the control
–
to the required setting.
›››
Fig. 129 to position
Positions
The control positions roughly correspond to
the following vehicle load conditions.
-
›››
Fig. 129 to position
1
2
›››
Fig. 129 to position
3
Always adjust the range of the lights so
that:

Instrument panel: light range control.
›››
Fig. 130 to set the lights
Two front occupants, luggage compart-
ment empty.
All seats occupied, luggage compart-
ment empty.
All seats occupied, luggage compart-
ment fully loaded.
Driver only, luggage compartment fully
loaded.
CAUTION
»
121