Lights And Visibility - Seat Toledo 2019 Owner's Manual

Turning on/switching off the ignition, glow
plugs reheating
Turn on the ignition: turn the key to the
●
position.
Turn off the ignition: turn the key to the
●
position.
Diesel vehicles : the glow plugs reheat
● 
when the ignition is switched on.
Starting the engine
Manual transmission: press the clutch ped-
●
al all the way down and move the gearbox
lever into neutral.
Automatic transmission: press the brake
●
pedal and move the selector lever to the P
position or into N.
Turn the key to the position. The key au-
●
3
tomatically returns to the position. Do not
2
press the accelerator.
Start-Stop system*
When you stop and release the clutch pedal,
the Start-Stop system* turns off the engine.
The ignition remains switched on.

›››
in Introduction on page 196

›››
page 196
The essentials

Lights and visibility

2 Light switch
1
Instrument console: light panel.
Fig. 30
Turn the switch to the required position
›››
Fig. 30.
Sym- Ignition
bol switched off
Fog lights, dipped

beam and side
lights off.
The "Coming
home" and "Leav-

ing home" guide
lights may be
switched on.

Side light on.
Dipped beam

headlight off
Fog lights: move the switch to the first po-

sition, from positions
Rear fog light: move the switch complete-

ly from positions
Turn on fog lights: push the switch or turn it to
the position.



Turn signal and main beam lever
Ignition is
switched on
Light off or daytime
driving light on.
Automatic control of
dipped beam and
Turn signal and main beam lever.
Fig. 31
daytime running
light.
More the lever to the required position:
Right turn light: right-hand parking light
1
(ignition switched off).
Dipped beam
switched on.
, or .
  
, or .
  
›››
in Introduction on page 120
›››
page 120
»
21