Clean the ball-headed bar thoroughly
●
before returning it to the on-board toolbox.
Use and maintenance
Cover the clamping bush with the cap to pre-
vent dirt from entering.
Before hooking on the trailer, check the ball
head and, if necessary, lubricate it with ade-
quate lubricant.
Place the protective cover over the ball head
when storing the bar. This way, you will avoid
getting the boot dirty.
If it gets dirty, clean and dry the clamping
bush thoroughly with an appropriate product.
CAUTION
The top part of the clamping bush opening
is lubricated. Be careful not to remove this
lubrication.
Towing bracket device
239