– Remove the bulb holder
– Replace the bulb by pulling it out and inserting the replacement.
– Installation is done in the reverse order.
Turn signal bulb
– Raise the bonnet.
– Rotate the bulb holder
– Remove the bulb by pressing on the bulb holder and rotating at
the same time to the left.
– Installation is done in the reverse order.
Safety First
A
⇒ page 226, fig. 152
outwards.
4
Fig. 153 Single turn
signal lamp
⇒ fig. 153
A
to the left and pull.
A
Operating Instructions
Changing the rear lights (on the wing)
Overview of tail lights
Tail lights on side panel
•
Brake lights
•
Side lights
•
Turn signal
Accessing the side light bulbs
– Open the tailgate.
– Look for a lid with a grill behind the side lights.
Practical Tips
If and when
Fig. 154 Side lights
Technical Specifications
227