Information On Fuel Consumption - Seat Toledo 2019 Owner's Manual

The running order weight also includes 75 kg
of the weight of the driver and service fluids,
in addition to a fuel tank at 90% capacity.
From the difference between the total permit-
ted weight in running order the approximate
carrying capacity can be calculated
The carrying capacity must include:
occupants,
●
all pieces of equipment and other weights,
●
roof loads including the roof rack,
●
equipment that is not included in the run-
●
ning order weight,
when using the towing bracket, the drawbar
●
load (max. 50 kg).
Calculating fuel consumption and CO
emissions according to the ECE regula-
tions and the EU specifications
Calculation of fuel consumption for urban
driving begins when cold-starting the engine.
Then, normal city driving is simulated.
In calculating extra-urban driving fuel con-
sumption, braking and acceleration is done in
all gears, as in daily use of the vehicle. Driving
speed varies within a range of 0 and 120
km/h (75 mph).
The consumption value in combined driving is
composed of 37% of the value of urban driv-
ing and 63% of the value of extra-urban driv-
ing.
276
Technical data
WARNING
The maximum permitted weight values
must not be exceeded – Risk of an accident
and damage to the vehicle!
›››
.
Note
If you wish to calculate the exact weight
●
of your vehicle please contact a SEAT
dealer.
Depending on the volume of equipment,
●
driving style, road conditions, weather con-
ditions and the condition of the vehicle,
consumption values can differ from the
theoretical values stated here.
Information on fuel con-
2
sumption
Fuel consumption
Approved consumption values are derived
from measurements performed or supervised
by certified EU laboratories, according to the
legislation in force at the time (for more infor-
mation, see the Publications Office of the Eu-
ropean Union on the EUR-Lex website: © Eu-
ropean Union, http://eur-lex.europa.eu/) and
apply to the specified vehicle characteristics.
The values relating to fuel consumption and
CO emissions can be found in the documen-
2
tation provided to the purchaser of the vehi-
cle at the time of purchase.
Fuel consumption and CO emissions de-
2
pend on the equipment/features of each indi-
vidual vehicle, as well as on the driving style,
road conditions, traffic conditions, environ-
mental conditions, load or number of passen-
gers.
Note
In practice, and considering all the factors
mentioned here, consumption values can
differ from those calculated in the current
European regulations.
Weights
Kerb weight refers to the basic model with a
fuel tank filled to 90% capacity and without
optional extras. The figure quoted includes 75
kg to allow for the weight of the driver.
Special versions, optional equipment fittings
or retro-fitting accessories will increase the
›››
weight of the vehicle .
WARNING
Please note that the centre of gravity
●
may shift when transporting heavy objects;
this may affect vehicle handling and lead
to an accident. Always adjust your speed