Seat Toledo 2019 Owner's Manual page 171

Apple CarPlay™*
3 Valid for compatible iPhone™ mobile tele-
phones. Also, iPhone™ mobile telephones only
support Apple CarPlay™
Apple CarPlay™ is a protocol which enables
communication between a mobile telephone
and the Infotainment system via USB.
This makes it possible to display and operate
the mobile telephone on the Infotainment
system screen.
Requirements
In order to use Apple CarPlay™, the following
requirements must be met:
Make sure that you do not have Apple
●
CarPlay™ restricted on your device, at: Set-
tings > General > Restrictions >
.
CarPlay > ON
The mobile device must be compatible with
●
Apple CarPlay™.
The mobile device must be connected to
●
the Infotainment system via USB.
Initiating the connection
In order to initiate the connection with the
mobile device, it is simply necessary to con-
nect it to the Infotainment system via the USB
connection.
A pop-up screen will appear, which will re-
●
quest that you accept the device.
Connectivity
If you start the session using Apple
●
CarPlay™ technology, it will not be possible
to pair another device via Bluetooth
lowing message will appear in the main
Phone menu:
Please disconnect Apple CarPlay
first, before you can connect an-
other mobile telephone.
Holding down the button will start the

Apple™ voice "engine".
To return to the basic contents of the Infotain-
ment system, press the SEAT icon.
Android Auto™*
3 Valid for compatible Android mobile phones.
Android Auto™ is a protocol which enables
communication between a portable device
and the Infotainment system via USB.
This makes it possible to display and operate
the mobile telephone on the Infotainment
system screen.
Requirements
In order to use Android Auto™, the following
requirements must be met:
The mobile device must be compatible with
●
Android Auto™.
The mobile device must be connected to
●
the Infotainment system via USB.
® . The fol-
The Android Auto™ application should al-
●
ready be downloaded and installed on the
mobile device.
Initiating the connection
In order to initiate the connection with the
mobile device, it is simply necessary to con-
nect it to the Infotainment system via the USB
connection, and to be sure to follow the in-
structions of the device being paired.
The first connection to Android Auto™ must
●
be done while the vehicle is stationary.
Once the first pop-up window about ac-
●
cepting data transfer between the car and
the device has been accepted, a message
will appear requesting that you check your
mobile device for the confirmations needed
to pair it with the Infotainment system.
If you are initiating the session using
●
Android Auto™ technology via USB, the mo-
bile telephone connects automatically via
Bluetooth ® to the Infotainment system tele-
phone and it will not be possible to pair an-
other mobile telephone via Bluetooth
Holding down the
Android™ voice "engine".
To return to the basic contents of the Infotain-
ment system, press the Return to SEAT
button.
®
.
button will start the

»
169