Loosening wheel bolts
Insert the box spanner onto the wheel bolt
●
as far as it will go
1)
.
Grip the end of the box spanner and turn
●
the wheel bolt about one turn anti-clockwise
›››
Fig.
63.
Tightening wheel bolts
Insert the box spanner onto the wheel bolt
●
1)
as far as it will go
.
Grip the box spanner as close to the end as
●
possible and tighten the bolt firmly by turning
clockwise.
WARNING
The wheel bolts should only be loosened
slightly (about one turn) before raising the
vehicle with the jack. Risk of accident!
1)
The corresponding adapter is required to un-
screw or tighten the anti-theft wheel bolts
›››
page
49.
50
The essentials
Raising the vehicle
Wheel change: support points of the
Fig. 64
jack.
Fitting the jack.
Fig. 65
Place the jack* (vehicle tools) on firm
●
ground. If necessary use a large, strong
board or similar support. If the surface is slip-
pery (for example tiles) place the jack on a
rubber mat or similar to prevent it from slip-
›››
ping
.