Seat Toledo 2019 Owner's Manual page 90

Side lights
A
Main beam headlights
B
Dipped beam headlights
C
Turn signal lights
D
Daylight
E
Changing side light bulbs
Changing side light bulbs.
Fig. 90
Raise the bonnet.
–
Remove the protective cover
–
Remove the bulb holder
–
pulling it outwards.
Remove the bulb by pulling it out and fit the
–
new one.
Installation involves all of the above steps in
–
reverse sequence.
88
Fit the protective cover. Make sure that the
–
cover fits correctly on the housing during
operation.
Check whether the new bulb is working.
–
Changing main beam headlight
bulb
Fig. 91
Raise the bonnet.
–
Remove the protective cover.
–
›››
Fig. 90.
Remove connector
–
›››
Fig. 90 by
1
outward.
Extract the bulb and fit the replacement so
–
that it fits correctly into the recess on the
reflector.
Installation involves all of the above steps in
–
reverse sequence.
Emergencies
Changing main beam headlight bulbs.
›››
Fig. 91 by pulling
1
Fit the protective cover. Make sure that the
–
cover fits correctly on the housing during
operation.
Check whether the new bulb is working.
–
Changing dipped beam light bulbs
Changing dipped beam headlight
Fig. 92
bulbs:
Changing dipped beam headlight
Fig. 93
bulbs.arch trim.