Turn the wheel for access to the wheel
–
housing cover and remove the cover
›››
Fig.
92.
Remove the protective cover from the
–
›››
headlight
Fig.
93.
›››
Remove connector
Fig. 93
–
outward.
›››
Unclip the retainer spring
Fig. 93
–
pressing clockwise and inwards.
Extract the bulb and fit the replacement so
–
that the lug on the base fits into the recess
on the reflector.
Fit the connector.
–
Fit the protective cover. Make sure that the
–
cover fits correctly on the housing during
operation.
Replace the wheel housing cover.
–
Check whether the new bulb is working.
–
Fuses and bulbs
Changing turn signal bulbs
by pulling
1
2
Changing turn signal bulbs.
Fig. 94
Raise the bonnet.
–
Turn the bulb holder
–
clockwise and remove it.
Remove the bulb by pressing on the bulb
–
holder and turning it anti-clockwise at the
same time.
Fit the replacement bulb in the bulb holder
–
and turn clockwise as far as it will go.
Check whether the new bulb is working.
–
Changing daytime driving light
bulbs
Fig. 95
Raise the bonnet.
›››
–
Fig. 94
anti-
1
Turn the bulb holder
–
clockwise and remove it.
Remove the bulb by pressing on the bulb
–
holder and turning it anti-clockwise at the
same time.
Fit the replacement bulb in the bulb holder
–
and turn clockwise as far as it will go.
Check whether the new bulb is working.
–
Changing daytime driving light bulbs.
›››
Fig. 95
anti-
1
89