Seat Toledo 2019 Owner's Manual page 204

With the help of this system, the ABS is activa-
ted more quickly and more efficiently.
The brake assist function is deactivated auto-
matically when the brake pedal is released.
Hill hold control (HHC)*
The HHC system makes it easier to start the
vehicle on hills. The system maintains the
brake pressure created by pressing down on
the brake pedal for 2 seconds after it has
been released. Your foot can be removed
from the brake pedal and you can use the
accelerator pedal and move away on a hill
without having to use the handbrake. The
brake pressure drops as the accelerator ped-
al is pressed. If the vehicle cannot be started,
it will start to move backwards after 2 sec-
onds.
The HHC is activated on gradients of over 5%,
if the driver door is closed. It only works for
starting on hills, moving both forward and in
reverse. It is not activated during start-up
down hill.
Control lamp
If the control lamp flashes, the ESC is

working.
If the warning lamp illuminates on ignition,

the ESC system may have switched off due to
technical reasons. Turn off the ignition and
turn it on again. Upon switching on the igni-
tion again, if the warning lamp has switched
202
Driving
off, this means the ESC is functioning correct-
ly again.
If the warning lamp is illuminated there is a

fault in the ESC.
The informative display indicates:
Fault: electronic stability con-
trol (ESC)
or
Fault: traction control system
(ASR)
Go to a technical service.
Note
If the battery is disconnected and connec-
ted again, the yellow warning lamp
lights up when the ignition is switched on.
This warning lamp must switch off after
covering a short distance.
Anti-lock brake system (ABS)
The ABS system prevents the wheels locking
during braking. This helps the driver keep
control of the vehicle.
The driver is made aware of ABS assistance
by the pulsating of the brake pedal and a
characteristic noise.
Keep the brake pedal pressed down while the
ABS is working. The ABS will switch off when
the brake pedal is released. Never brake in-
termittently while the ABS is working!
Control lamp
If the warning lamp is illuminated, there is a

fault in the ABS.
The informative display indicates:
ABS fault
The brake system alone is operational in the
vehicle, without ABS.
Go to a technical service.
WARNING
If the warning lamp illuminates togeth-
● 
›››
er with the page 200

, stop the vehicle! Go to a technical serv-

ice.
A fault in the Anti-lock brake system
●
(ABS) can lead to longer braking distances
– Risk of accident!
Anti-slip regulation of the driving
wheels (ASR)*
If the wheels start to slip, the TCS adapts the
engine speed to the driving conditions. Par-
ticularly in unfavourable conditions, the TCS
helps starting, accelerating and hill starts.
warning lamp,
