Table of Contents
Advertisement
Figure 22. Removing the system cover
Installing the system cover
Prerequisites
1
Follow the safety guidelines listed in
2
Remove the front bezel.
3
Power off the system and all attached peripherals.
4
Disconnect the system from the electrical outlet and disconnect the peripherals.
5
Ensure that all internal cables are connected and placed out of the way and no tools or extra parts are left inside the system.
Steps
1
Align the tabs on the system cover with the slots on the system.
2
Press the cover release latch, and push the cover toward the system until the latch locks into place.
3
Using a 1/4-inch flat head or a Phillips #2 screwdriver, rotate the cover release latch lock clockwise to the locked position.
50
Installing and removing system components
Safety
instructions.
Hide quick links:
Advertisement
Table of Contents
