Installing The System Cover; Support Bar; Removing The Support Bar - Dell EMC PowerEdge R940xa Installation And Service Manual

Installing the system cover

Prerequisites
1. Follow the safety guidelines listed in
2. Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.
Steps
1. Place the system cover on the system.
2. Push the system cover to the front of the system and press the latch down.
3. Use a 1/4 inch flat head or Phillips #2 screwdriver to turn the latch release lock clockwise to the locked position.
Figure 28. Installing system cover
Next steps
1. Follow the procedure listed in After working inside your

Support bar

The support bar provides support for the chassis walls.

Removing the support bar

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Safety instructions.
system.
Safety instructions.
Before working inside your system.
Installing and removing system components 53