Table of Contents
Advertisement
Figure 20. Removing the system cover
Next steps
1.
Replace the system
cover.
Installing the system cover
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Ensure that all internal cables are connected and routed properly, and no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the guide slots on the system and slide the system cover.
2. Close the system cover release latch.
3. Using a 1/4-inch flat head or Phillips #2 screwdriver, rotate the lock clockwise to the lock position.
50
Installing and removing system components
Safety instructions
Before working inside your system
on page 46.
on page 47.
Advertisement
Table of Contents
