Table 5-9 Menus Of "Parameterize Fm - Siemens SIMATIC FM 453 Manual

Defining Parameters of the FM 453
5.4 Parameterization with "Parameterize FM 453"
Entering the
You have a variety of options for entering your parameterization data.
Values
1. User data
2. Machine data
3. Tool compensation data and increment sizes
4. Traversing programs
A comment column is included in the tables for MD, SM, and TO values.
This comment is not stored in the data block. It can be printed out or stored
with the data in the file on export.
Menus of "Parame- The following table shows you an overview of the menus of
terize FM 453" "Parameterize FM 453".
Table 5-9 Menus of "Parameterize FM 453"
Menu Title or Entry
(With Single Command)
File
New >
Machine data >
Channel 1
Channel 2
Channel 3
Increment >
Channel 1
Channel 2
Channel 3
Tool offset data
Channel 1
5-26
You can input values or select texts in a table. Select input fields with the
cursor and enter the values. You can select the associated texts for the
values with the space key.
The values are entered in dialog boxes and windows selected by option
tabs.
To display the machine data in a table, select the menu View Table
form. Here you can enter the values as described in the user data section.
You can input the values in a table. Select input fields with the cursor and
enter the values.
Traversing programs are input in text format.
Shortcut
– Create, open, save, print and generate data blocks
– Creates a new data block
– Creates a new DB-MD
–
–
–
– Creates a new DB-SM
–
–
–
> – Creates a new DB-TO
–
Significance
for channel 1
for channel 2
for channel 3
for channel 1
for channel 2
for channel 3
for channel 1
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01