Siemens SINAMICS G110M Function Manual page 55

General information for accessing inverter parameters
You must create a variable with the following structure for each parameter that you want to
display or change using the SIMATIC panel: DBX DBY Z
● X: Data block number ≙ parameter number
● Y: Data type (can be found in the parameter list)
● Z: Data block offset ≙ parameter index
Image 3-9
Fieldbuses
Function Manual, 01/2016, FW V4.7 SP6, A5E34229197B AC
Accessing inverter parameters using a SINAMICS G120 as example
Communication via PROFIBUS and PROFINET
3.3 S7 communication
55