Siemens SINAMICS G110M Function Manual page 66

Communication via PROFIBUS and PROFINET
3.4 Communication via PROFINET
● Get_Measurement_Values
The command returns the requested measured value using the measured value ID
● Get_Measurement_Values_with_object_number
The command returns the requested measured values using the measured value ID and
the object number. The object number corresponds to the drive object ID.
Error values
Table 3- 16
Error
value 1
001 hex
03 hex
04 hex
06 hex
07 hex
08 hex
50 hex
51 hex
52 hex
53 hex
54 hex
66
Error values in the parameter response
Meaning
Invalid Service_Request_ID
Invalid Modifier
Invalid Data_Structure_Identifier_RQ
No PE energy-saving mode supported
Response too long
Invalid Block Header
No suitable energy-saving mode available
Time is not supported
Impermissible PE_Mode_ID
No switch to energy saving mode because of state operate
service or function temporarily not available
Function Manual, 01/2016, FW V4.7 SP6, A5E34229197B AC
Fieldbuses