Introduction - Siemens SINAMICS G110M Function Manual

Introduction

About this manual
This manual describes the settings and preconditions that are required to communicate with
a higher-level control system with the subsequently listed fieldbus systems.
Fieldbuses for SINAMICS G120
● PROFIBUS DP
● PROFINET
● EtherNet/IP
● USS
● Modbus RTU
● CANopen
Additional fieldbuses for SINAMICS G120P
● BACnet MS/TP
● P1
Additional fieldbuses for SINAMICS G110M
● AS-Interface
Communication with the control, even when the line voltage is switched off
If, in your plant or system, communication with the control system should continue to function
even when the line voltage is switched off, then you must externally supply the
inverter/Control Unit with 24 V DC. To do this, use terminals 31 and 32 – or connector X01.
You can find additional details in the operating instructions for the inverter or the Control
Unit.
What is the meaning of the symbols in the manual?
An operating instruction starts here.
This concludes the operating instruction.
Download from the Internet
DVD that can be ordered
Fieldbuses
Function Manual, 01/2016, FW V4.7 SP6, A5E34229197B AC
Reference to further information in the manual
2
11