Siemens SINAMICS G110M Function Manual page 146

Communication via RS485
5.5 Communication via BACnet MS/TP - only CU230P-2 HVAC / BT
Binary Input Objects
Instance Object name
ID
BI0 DI0 ACT
BI1 DI1 ACT
BI2 DI2 ACT
BI3 DI3 ACT
BI4 DI4 ACT
BI5 DI5 ACT
BI7 DI7 ACT
BI8 DI8 ACT
BI10 DO0 ACT
BI11 DO1 ACT
BI12 DO2 ACT
Binary Output Objects
Instance Object name
ID
BO0 DO0 CMD
BO1 DO1 CMD
BO2 DO2 CMD
Binary value Objects
Instance Object name
ID
BV0 RUN / STOP
ACT
BV1 FWD / REV
BV2 FAULT ACT
BV3 WARN ACT
BV4 MANUAL /
AUTO ACT
BV7 CTL
OVERRIDE
ACT
146
Description
State of DI 0
State of DI 1
State of DI 2
State of DI 3
State of DI 4
State of DI 5
State of AI 1 - used as DI
State of AI 2 - used as DI
State of DO 0 (relay 1)
State of DO 1 (relay 2)
State of DO2 (relay 3)
Description
Controls DO 0 (relay 1)
Controls DO 1 (relay 2)
Controls DO 2 (relay 3)
Description
Inverter status regardless of com-
mand source
Direction of rotation regardless of
command source
Inverter fault
Inverter warning
Indicates the source of the manu-
al/auto inverter control
ACT displays the inverter's control
unit from the BACnet override con-
trol unit via BV93.
Note that the operator panel's "Ma-
nual" operating mode has a higher
priority than the BACnet override
control.
Possible Text active /
values text inactive
ON/OFF ON/OFF
ON/OFF ON/OFF
ON/OFF ON/OFF
ON/OFF ON/OFF
ON/OFF ON/OFF
ON/OFF ON/OFF
ON/OFF ON/OFF
ON/OFF ON/OFF
ON/OFF ON/OFF
ON/OFF ON/OFF
ON/OFF ON/OFF
Possible Text active /
values text inactive
ON/OFF ON/OFF
ON/OFF ON/OFF
ON/OFF ON/OFF
Possible values Text
active
RUN / STOP STOP
REV / FWD FWD
FAULT / OK FAULT
WARN / OK WARN
AUTO / AUTO
MANUAL
ON/OFF 0
Function Manual, 01/2016, FW V4.7 SP6, A5E34229197B AC
Access Parameter
type
R r0722.0
R r0722.1
R r0722.2
R r0722.3
R r0722.4
R r0722.5
R r0722.11
R r0722.12
R read r747.0
R read r747.1
R read r747.2
Access Parameter
type
C p0730
C p0731
C p0732
Text Ac- Parameter
inactive cess
type
RUN R r0052.2
REV R r0052.14
OK R r0052.3
OK R r0052.7
LOCAL R r0052.9
1 R r2032[10]
Fieldbuses