Siemens SINAMICS G110M Function Manual page 49

Status messages, module status
For G120, independent of the status, for all slots "00" is always output, i.e. valid user data.
Channel-related data
2
3
9
16
17
18
19
20
21
When several faults are allocated at one inverter with the same message class, then only one messa-
ge is displayed.
Fieldbuses
Function Manual, 01/2016, FW V4.7 SP6, A5E34229197B AC
Undervoltage
Overvoltage
Error
Hardware/software error
Line supply/filter faulted
DC link overvoltage
Power electronics faulted
Electronic component overtemp.
Ground/phase fault detected
Communication via PROFIBUS and PROFINET
22 Motor overload
23 Commun. with controller faulted
24 Safety monit. Detected an error
25 Act. Position/speed value error
26 Internal communication faulted
27 Infeed faulted
28 Braking controller faulted
29 External signal state error
30 Application/function faulted
3.1 PROFIdrive profile
49