Honeywell Vibrex 2000 User Manual page 95

Incident Light -
probe could result in incorrect measurements. This type of light
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
In most cases, the user can collocate the probe with the
Velocimeter, but for some installations, the user may
need to mount the probe by itself, using the single
mounting screw provision.
NOTE: The user may need to experiment with several
mounting techniques and/or positions to find the
optimum positioning.
Unwanted light that reflects into the photocell
Chapter 4 – Installation
13841 Rev A
79