Honeywell Vibrex 2000 User Manual page 151


Blade tracking is accessed using the
TRACK & BALANCE menu (as opposed to the V2K/V2K+
STROBEX TRACK

Both Strobex and FasTrak
for many helicopter models. These can be recalled and saved
under new configuration names. The first time the
key is pressed the user is prompted for one of these
configurations as shown below:

Use the  and  keys find a configuration, then press the
START
up to 25 user selected configurations.
NOTE: If you do not see your desired configuration, select
the closest one as it can be edited later. The configurations
include number of blades, rotor diameter, tracker and
adjustment sensitivities.

The EV2K+ track menu appears as follows as shown below.
At this point, either
selected.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
key).
= A D D T R A C K C O N F I G =
S e l e c t f r o m F a c t o r y
C o n f i g u r a t i o n s
( U s e d : 0 0 o f 2 5 )
▲ P R E V I O U S
< A - 1 0 9 E G n d F a c t o r y >
▼ N E X T
t o a d d , p u s h S T A R T
key to select the desired configuration. You can save
STROBEX
13841 Rev A
Chapter 5 – General Operation
TRACK
®
configurations are factory preset
or
FasTrak
135
key under the
TRACK
tracking can be