Chapter 5 – General Operation
specified in the solution, the user must change the values.
Just enter the actual applied weight and/ or angle.
CAUTION: Failure to enter the actual values used
degrades the next solution and may not improve the
propeller's balance.
The closer the actual weight is to the specified amount and
the closer to the specified location, the better the initial and
subsequent solutions normally work.
If the user performed the original solution exactly as
specified, or if the user input the actual propeller weight, the
next solution will be correct for the propeller.
CAUTION: Even with the Autocorrection feature off, the
user must record the actual weight and installation angles
used.
5.4.3.2
The illustration below shows a diagram of the Propeller
Protractor.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
Using the Propeller Protractor
13841 Rev A
118