Honeywell Vibrex 2000 User Manual page 131

PROP BALANCE QUALITY
BETTER |==X===| WORSE
► DONE
► INSTALL PERMANENTLY
to solve, push START
An X-mark displays on a better/worse scale bar, showing the
level of balance the user has achieved (see above). In addition to
the bar graph, there is a text label under the graph that indicates
the general balance and vibration level achieved (good in the
example above).
Read the Balance Quality graph, as follows:

Anything better than or equal to acceptable means the
propeller meets the balance guidelines given in The Smooth
Propeller.

The label unacceptable means the balance reading is higher
than the recommended 0.2 IPS.

The label warning indicates the propeller has a balance
reading over 1.2 IPS. The user must investigate the reason
for an IPS reading higher than 1.2 IPS before trying to
balance the propeller.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
0.15-->good
Chapter 5 – General Operation
13841 Rev A
115
BALANCE LEVEL
GRAPH
BALANCE QUALITY
LABEL
MEASURED
IMBALANCE IN IPS