Table of Contents
Advertisement
3.3.1.1
See the following table for a list of the basic settings to use for
downloading data from the Vibrex 2000 or Vibrex 2000 Plus to
any printer and/or serial interface.
3.3.1.2
Connect a Seiko Model DPU-414 printer to the Vibrex 2000 or
Vibrex 2000 Plus, as follows:
1. Connect the printer cable No. 610-449 to the Vibrex unit and
the printer.
2. Turn ON the printer and press the
line light- emitting diode (LED) is not illuminated.
3. Select the desired information to be printed in the Vibrex
unit and press
NOTE: If the batteries are depleted in the DPU-414,
connect the ac wall adapter (No. 610-463 for 110 Vac or
No. 610-463A for 220 Vac) and operate the printer
normally.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
Basic Settings
Parameter
Baud rate
Number of bits
Number of stop bits
Parity
Xon/Xoff
Connecting the Printer
.
PRINT
Chapter 3 – Getting Started
Setting
9600
8
1
None
Supported
ONLINE
13841 Rev A
37
button if the on-
Advertisement
Chapters
Table of Contents
