Reviewing Spectrum Peak Measurements - Honeywell Vibrex 2000 User Manual

Chapter 5 – General Operation


A day/date code also displays. See Section 5.4.5.1
"Reviewing Propeller Balance Measurements".
2. The user may go directly to another run by pressing the
NEXT RUN
3. The user may skip to any measurement stored by pressing
the
number the user wants to view.
5.4.5.3
Review spectrum peak measurements, as follows:
1. From the Review Menu screen press the
context key. The measurements display, as follows:



A day/date code also displays. See Section 5.4.5.1
"Reviewing Propeller Balance Measurements".
2. The user may go directly to another spectrum by pressing
either the
NOTE: For more information on the Vibrex unit's
Spectrum Analysis feature, see Section 5.6 "Spectrum
Analysis".
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
The RPM of the balance measurement displays in the
lower left corner of the screen.
The RPM of the balance run displays in the lower left
corner of the balance reading.
or
PREV RUN
MEASUREMENTS
Reviewing Spectrum Peak
Measurements
The list number displays in the upper right corner of the
screen.
The annotation displays at the bottom of the screen.
The RPM range of the measurement displays above the
annotation.
NEXT LIST
context key.
context key and entering the run
or context key.
PREV LIST
13841 Rev A
128
PEAK LISTS