Multiple Propeller Feature - Honeywell Vibrex 2000 User Manual

simple method of doing this. An intermediate correction menu
appears when:

Auto-correction is ON and correction factors have been
computed that are different from the factory settings, and

The user transitions to a new balance run or presses any
button terminates the current balance session, e.g.
PERMANENT SOLUTION DONE.
The following screen will appear showing the original and
corrected factors. The user may then choose to save this
configuration by pressing the SAVE NEW PROP CONFIG
context key.
5.4.1.6
The Vibrex 2000 allows the user to switch between up to 4
propeller balance sessions. Each session is identified by the
aircraft ID and Eng suffix. Use the PROPELLER BALANCE
option in the Main Menu screen to access this feature.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
A u t o - c o r r e c t e d f r o m
4 0 . 0 0 G / I P S @ 1 2 : 0 0
t o
4 4 . 5 0 G / I P S @ 0 1 : 4 5
► S A V E N E W P R O P C O N F I G
D o n ' t s a v e , p u s h S T A R T

Multiple Propeller Feature

13841 Rev A
Chapter 5 – General Operation
109