Honeywell Vibrex 2000 User Manual page 12

Quick Reference Guide

Observe displayed note then press

Implement the solution and power off the Vibrex unit.
Propeller Balance, After Run No. 1

Turn on the Vibrex unit.

Select Propeller Balance from the Main Menu
screen.

Vibrex 2000 Plus Only - Select Continue Current
Session.

Edit the solution if it is different from the solution done
earlier then press

Operate the propeller at the same RPM as done in Run No.
1. When the RPM is steady, press

When the Vibrex unit has finished collecting data, press
START

Continue making adjustments until the propeller yields the
desired IPS level, then press
Quality screen.
Helicopter/Fixed Wing Balance
(EV2K+ only)
First Time Startup

Install the photocell, velocimeter(s), and reflective tape on
the helicopter/aircraft.

Turn on the Vibrex unit.

Select Helicopter Balance from the Main Menu
screen. (Fixed Wing Balance for fixed wing version.)

Use the ↑↓
helicopter/aircraft model from the factory selections.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
START
.
keys to select your user
ARROW
13841 Rev A
START
.
START
from the Prop Balance
DONE
xii
.
.