Clearing Memory Contents - Honeywell Vibrex 2000 User Manual

Chapter 6 – Maintenance
Note: If Digital balancer is found to be out of Spec's
contact Honeywell Technical Operations Center.
6.3.6
6.3.6.1
There is a global clear of all memory contents invoked by
pressing the zero "0" key during the power up self test.
NOTE: EV2K+ series. A "CLEARNG MEMORY" message
will be briefly displayed and then the unit will shut off.
Power back on again to continue.
Global clear will erase ALL memory contents, including all runs,
spectrums and the fault log. If you are having problems with the
unit, it is advisable to print the fault log PRIOR to erasing it. See
Section 3.3 Print Data.
CAUTION: EV2K+ Series. This series gives you the
ability to modify balance and FasTrak charts and save
chart corrections. Use the global clear option only as a
last resort if you have made modifications. It is highly
recommended to use the global PRINT button and then
select
chart modifications before clearing.
6.3.7
This section explains how to completely disassemble and
reassemble the Vibrex 2000 and Vibrex 2000 Plus units, under
the following topics:
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.

Clearing Memory Contents

Vibrex 2000
TYPE <AC CHARTS>
Complete Unit Disassembly
13841 Rev A
then to print out any
PRINT
224