Displaying Cursor Data - Honeywell Vibrex 2000 User Manual

5.8.4.2
The Vibrex 2000 Plus also allows the user to display specific
data associated with the current cursor position. Do this action,
as follows:
1. In the Spectrum Viewer screen, place the cursor on the
desired peak.
2. Press the
(see below).
"
17JAN00 16:54:46 1A
0- 30,000 RPM
CURRENT CURSOR DATA
0.86 IPS
1.1 mils Pk-Pk
3.6 Gs
This screen gives the user specific vibration data on the current
cursor position.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.

Displaying Cursor Data

?
context key. The Cursor Data screen displays
" LIST 1
15300 RPM
255.0 Hz
13841 Rev A
Chapter 5 – General Operation
199