Table of Contents
Advertisement
From this screen, the user has the following options:
6. Plot the readings on the appropriate chart at the intersection
of clock angle and IPS. Follow the fine lines perpendicular
to the heavy borders of the chart.
7. Read the changes specified on the heavy border and apply
these changes to the rotor system.
8. When the user is finished, press the GO BACK key as many
times as necessary to return to the Main Menu screen.
5.5.3
By way of a typical example, this section explains how to use the
Honeywell Rotor Protractor for balancing helicopter rotors.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
WHAT DO YOU WANT TO
DO WITH MEAS
► ANNOTATE MEAS
► REDO MEAS
cancel with GO BACK
save with START
•
Press
ANNOTATE
current measurements.
•
Press
REDO MEAS
measurements.
•
Press
GO BACK
measurements.
•
Press
START
continue with the program.
Using the Rotor Protractor
Chapter 5 – General Operation
3
?
3
3
to store and annotation with the
to retake the current
to cancel and erase the current
to save the current measurements and
13841 Rev A
145
Advertisement
Chapters
Table of Contents
